3 phase transmission

[amir00mito]

hi all, i am trying to simulate on pscad 3 phase transmission line & apply faults on it like phase ground , line-line,...ect

my work is missing something as it does not simulate any faults although am applying it !!!!!

can anyone help ??? it is my project guys

here is my work

[ram prasad]

DEAR AMIR,

THERE ARE SOME MISTAKES IN YOUR CASE, I HAVE MODIFIED YOUR CASE NOW IT IS OK, YOU CAN CHECK DIFFERENT TYPES OF INTERNAL FAULTS, NO NEED TO ADD SINGLE PHASE FAULTS(EXTRA). IAM ATTACHING THE FILE.

REGARDS

RAM PRASAD

[ram prasad]

I LIKE EGYPT VERY MUCH, ONE DAY I VISIT YOUR PLACE. AND I TAKE PHOTOGRAPHSSTANDING INFRONT OF PYRAMID.

[amir00mito]

Dear ram,

thanks for ur help , am really happy for ur replay , u helped me on my graduation project.....

& if i can do anything for u when u come to egypt , it will be my pleasure

[amir00mito]

Dear ram,
first sorry for disturbance but i am trying to compare between my work & urs ; i found only one mistake dat i am putting extra fault ...
i removed them but it doesnt operate correctly!!
could u tell me what are my other stupid mistakes ?

with my regards
amir

[Icebergovich]

Amir: Your time to apply fault was 1s, while the time of the total simulation was 0.5s. This means that you originally simulate only half of the time needed before the fault is applied. That was changed in Rams project file.

//Icebergovich

[ram prasad]

dear amir,

please change the PROJECT SETTINGS, that can be done by right clicking the mouse on the empty space. then you will find

DURATION OF RUN(SEC) = (here default time is 0.5sec, change according to ur faulttime

SOLUTION TIME STEP(USEC) = keep as it is

CHANNEL PLOT STEP(USEC) = keep as it is

[amir00mito]

Dear Ram,

thanks for your kind replay

i hope i can repay it for you

Amir